Search Results

Page: 1 of 2
Axon Neck Bander

- EZ-200
- EZ-Series Standard Format:
- Speed (Single Head) 120 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12800
In Stock
Axon Neck Bander

- EZ200

- EZ-Series Standard Format:

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12733
In Stock
Axon Neck Bander EZ-A1

- Stainless steel fully automatic tamper evident neck bander
- Runs unregistered bands at speeds up to 40 cpm dependant on length of band.
- 45" vertical hang over clearance.
- 110 volts
Stock#: 12193
In Stock
CMS Gilbreth Neck bander / sleeve labeler

- Twin feed screw control
- 6" layflat capacity
- 20" Roll capacity
- 440V 3 phase
- Foot print - 6' long X 3 foot deep
- Seperate main control cabinet on stand - 3 ft x 3 ft
Stock#: 12897
In Stock
PDC Sleeve Labeler System

- Consistes of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12804
In Stock
PDC Sleeve Labeler System

- Consistes of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
-
Stock#: 12803
In Stock
Sleeve Labeler System

- Consistes of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12806
In Stock
Axon EZ-100

- One Skid Mounted Axon EZ-100 Sleeve Labeler/Neck Bander
- Two 48" shrink tunnels (dual zone Shrink)
- Film registration
- Horizontal perforation assembly
- Cooled Integral table top conveyor
- All Stainless Steel construction
- Unit has already been reconditioned setup tested and is in excellent running condition still threaded.
- 480 volts
Stock#: 12429
Sold - Contact us for similar option
Axon EZ-200

- EZ-Series Standard Format:
- Speed (Single Head) 120 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12801
Sold - Contact us for similar option
Axon Neck Bander

- EZ-200
- EZ-Series Standard Format:
- Speed (Single Head) 120 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12734
Sold - Contact us for similar option
Axon Neck Bander

- EZ- 200
- Banding head rated at 220 bpm.
- PLC control. Stepper film feed drive system.
- User friendly operator interface.
- Stainless steel frame and enclosure.
- Quick change container size features.
- 110 volts
Stock#: 12254
Sold - Contact us for similar option
PDC Neck Bander

- High speed tamper evident neck bander.
- Integrated single timg screw assembly original conveyor and tunnel in stock as well.
- All stainless steel construction.
- Speeds rated to 250 cpm.
- 220V single phase 7A.
Stock#: 12100
Sold - Contact us for similar option
Page: 1 of 2
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.