Search Results

Page: 1 of 2
Bottle Rinser

- Stainless-steel construction
- 6 nozzle air rinser
- 5/8" nozzle diameter x 10" long
- 52" nozzle mounting bar
- Filler frame is fully enclosed with stainless steel panels and gasketed access door
- LCD control panel with PLC stores up to 50 filling cycle setup parameters for recall
- Automatic conveyor mounted bottle indexing gates to control container movement
- Electric bottle height adjustment
- Batch bottle counter records number of filling cycles completed
- Integrated Conveyor

- Volts: 110V 1p to 220V 2p
- Hz: 50/60Hz
- Air: 6cfm @ 80psi

- Length: 24in
- Width: 24in
- Height: 24in
Stock#: 12867
In Stock
Bottle Rinser Cleaner

-Stainless Steel Construction
-Cleaning Section Consists of Nozzles on a Manifold
-High In / Low Out Configuration
-Mull Top

-Length: 38ft
-Width: 48in
-Height: 13ft
-Infeed Conveyor Set 12ft From Floor
-Exit Conveyor Height set at 47in From Floor
-Powered by a 480v 3 Phase Gearhead Drive
Stock#: 13240
In Stock
Gripper Rinser

- 150 BPM at 1.5 Liters
- Air clean unit
- 3-1/4" tabletop chain infeed & discharge
- 36" infeed & discharge conveyor height
- Small footprint machine
- 4' wide x 12' long
- 480 volts 3 phase
Stock#: 13034
In Stock
High Speed Gripper Rinser

-All Stainless Steel Construction
-Dual Gripper Belt
-Low-In/ Low-Out
-Sanitize and rinse round and non-round containers from beer bottles, PET water bottles, juice containers, wine bottles, jam jars to anti-freeze jugs.
-This versatile rinser employs mediums ranging from clean potable water to fine mists of iodophor solutions, chlorine solutions, ozone treated water and ionized air.

-Length: 270in
-Width: 56in
-Height: 80in

Conveyor(gripper):
-Opening: 2 1/4in
-Width: 5 1/4in
Stock#: 13290
In Stock
I & H Rinser

- Infeed @ 12' and outfeed @ 6'
- All stainless gripper style rinser
- HIGH in and LOW out.
-Up to 1000 Bottles per Minute
-Can be switched to use Air or Water
-5-Lane Table Infeed Conveyor
-Single Lane Discharge Conveyor
-480v
-3 Phase
-60Hz
-Infeed / discharge differential approximately 61” (could be modified upon request)
-All stainless-steel frame and shrouding.
-All Stainless Gripper Chain with snap on gripper flights
-S configuration superior to Z configuration units, far superior
Stock#: 12438
In Stock
I & H Rinser

- Infeed @ 12' and outfeed @ 6'
- All stainless gripper style rinser
- HIGH in and LOW out.
-Up to 1000 Bottles per Minute
-Can be switched to use Air or Water
-5-Lane Table Infeed Conveyor
-Single Lane Discharge Conveyor
-480v
-3 Phase
-60Hz
-Infeed / discharge differential approximately 61” (could be modified upon request)
-All stainless-steel frame and shrouding.
-All Stainless Gripper Chain with snap on gripper flights
-S configuration superior to Z configuration units, far superior
Stock#: 12449
In Stock
I & H Rinser

- Infeed @ 12' and outfeed @ 6'
- All stainless gripper style rinser
- HIGH in and LOW out.
-Up to 1000 Bottles per Minute
-Can be switched to use Air or Water
-5-Lane Table Infeed Conveyor
-Single Lane Discharge Conveyor
-480v
-3 Phase
-60Hz
-Infeed / discharge differential approximately 61” (could be modified upon request)
-All stainless-steel frame and shrouding.
-All Stainless Gripper Chain with snap on gripper flights
-S configuration superior to Z configuration units, far superior
Stock#: 12450
In Stock
I & H Rinser

- Infeed @ 12' and outfeed @ 6'
- All stainless gripper style rinser
- HIGH in and LOW out.
-Up to 1000 Bottles per Minute
-Can be switched to use Air or Water
-5-Lane Table Infeed Conveyor
-Single Lane Discharge Conveyor
-480v
-3 Phase
-60Hz
-Infeed / discharge differential approximately 61” (could be modified upon request)
-All stainless-steel frame and shrouding.
-All Stainless Gripper Chain with snap on gripper flights
-S configuration superior to Z configuration units, far superior
Stock#: 12451
In Stock
Ionized Air Rinser

- Stainless Steel Construction
- Multiple Change Parts for Different Size Bottles
- Feed Screw Container Control
- 1 Container Inverting Unit and 1 Container Stand Up Unit at Each End of Screw
- All Adjustments have Digital Readout
- Multi-Color Stack Light
- Stainless Steel Conveyor Channel through the System
Stock#: 13132
In Stock
Ionized Air Rinser

- Stainless Steel Construction
- Multiple Change Parts for Different Size Bottles
- Feed Screw Container Control
- 1 Container Inverting Unit and 1 Container Stand Up Unit at Each End of Screw
- All Adjustments have Digital Readout
- Multi-Color Stack Light
- Stainless Steel Conveyor Channel through the System
Stock#: 13136
In Stock
Lowerator Rinser

-Air Conveyor Discharge
-Infeed Conveyor to the Arpac Tray Packer

x2 Airveyor 8ft Long
-Length: 8ft

x1 Matte Top Conveyor w/ Lanes to Arpac
-Length: 10ft
-Width 24in

x1Airveyor
-Length: 5ft

x1 Table Top Conveyor
-Length:12ft
-WIdth:8in

x1 Table Top Conveyor w/ Drive
-Length: 7ft
-Width: 8in

x1 Mass Flow Conveyor
-Length: 12ft
-Width: 15in
Stock#: 13221
In Stock
Orbital Bottle Washer

- 48" diameter rinse wheel
- Conveyor mount with single support wheel
- Equipped with static control module
- 220 volt 3 phase
Stock#: 12830
In Stock
Page: 1 of 2
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.