Rebuilt Machinery
Rebuilt machinery is distinguished from reconditioned or used machinery in that rebuilt equipment is completely refurbished to a high degree of precision and quality. Any questionable components are replaced and/or refitted from known good equivalents and machine operation is tested from production and quality control standpoints. Although some machines are configured for a particular usage (and remain so configured in our inventory), others are custom-configured as specified by the customer.
When we rebuild a particular piece of production machinery, the unit is torn down to base components, stripped, sandblasted, primed, all carbon steel or cast parts painted with Steel-It stainless steel coating (unless directed otherwise by customer). All gearboxes are rebuilt or replaced, all bearings, bushings, chain, sprockets, belts, pneumatics are replaced. Customer may specify any additional requirements prior to quoting, such as standardized electrics, line control devices, etc. Unit is supplied in like new mechanical condition and excellent cosmetic condition. These systems include a warranty.
With two full machine shops, a spacious assembly and test run area, and full Autocad design capabilities in house for CAM manufacturing, we are more than capable of tackling the most complex rebuild.
Before and After Photos
The samples below show the quality of equipment that we have supplied over the years. If you are interested in photos or references regarding specific types of machinery, please do not hesitate to contact us. Also see our used machinery or reconditioned machinery pages for other options.
 |
 |
| Horix model HAV 12-24 rebuilt before and after. |
|
 |
 |
| Resina model S20 rebuilt before and after. |
|
 |
 |
| Resina model U30 rebuilt before and after. |
|
 |
 |
| Horix model HB 9-18 rebuilt and converted to HBV 9-18. |
More Rebuilt Machinery
 |
|
Horix model HBV 9-18. Unit was completely rebuilt with 6 sets of change parts and two set of remanufactured valves. Runs between 60 and 120 containers per minute.
|
 |
|
Resina model U40. Stainless Steel. Unit was rebuilt and brought up to date with one set of change parts. Runs 38mm closures and two container sizes at 200 containers per minute.
|
 |
|
Horix model HAV 12-24. Unit was completely rebuilt with 2sets of change parts and one set of remanufactured valves. Runs at 200 containers per minute.
|
 |
|
Resina model LC-89. Unit was completely rebuilt and set for 89mm closures. Unit shown skidded prior to release from our assembly area. A small turntable was added at the discharge of the conveyor to eliminate large radius corner necessary for line layout, thus reducing the area required for the customers' line.
|
|