Search Results
Page: 1 of 2
Anderson Shrink Tunnel
- OAL is 14'
- 18" canvas belt feeds through a 30" W x 16" tall tunnel opening
- Tunnel length is 96"
- 480 volt - 3 phase
Stock#: 12618
In Stock
Axon Heat Shrink Tunnel
- Stainless steel
- 24" L x 18" W x 22" H (Body)
- 8" wide x 7-1/2" tall tunnel
- 240V 3 phase
Stock#: 12894
In Stock
Axon Heat Shrink Tunnel
- Stainless steel
- 24" L x 18" W x 22" H (Body)
- 8" wide x 7-1/2" tall tunnel
- 240V 3 phase
Stock#: 12895
In Stock
Bevco Warming Tunnel
-Air Infeed & Discharge
-Dayton Inline Blower
-Able to Use Air or Water
-V:180
-M8.2 Warmer
-Matte Top
-Max Product Height: 15in
-Length: 195in.
-Width: 140in
-Height: 102in
-Blower Diameter: 22in
-Control Panel Serial #: J6973
Stock#: 13197
In Stock
Krones Shrinkmat Steam Tunnel
- Overhead Steam Manifold w/ 11 Steam Control Valves and Gauges
- 2 Exhaust Ports: 5 1/2in diameter
- 1 Exhaust Port (Top of Steam Manifold): 6 1/2in Diameter
- Opening 6in & Adjustable
- Chain Width: 4 1/2in
- Length: 238in
- Width: 27 1/2in
- Height: 90in
*Pictures taken while machine was being unloaded*
Stock#: 13273
In Stock
Neck Band Shrink Tunnel
- Electrically heated tunnel
- All stainless steel construction
- Stand mounted tunnel w/ manual height adjuster
- 220V - 60 hz - 37 amps
- DOM: Nov. 2003
Stock#: 12808
In Stock
OAL Shrink Tunnel
- 48" long tunnel
- 9" tall x 6" wide throat
- Pneumatically controlled tilt assembly for tunnel
- 440 volt - 3 phase - 14.5 Amps
Stock#: 12898
In Stock
Preferred Pack Shrink Tunnel.
- Dual 1 hp blower motors
- Dual zone high speed dual velocity controls
- Emergency stop switches at both ends.
- Conveyor speed to 180 FPM.
Stock#: 12652
In Stock
Shrink Tunnel
- Measures 6"W x 48"L
- Elec. for tunnel 240V / 3 / 60hz
Stock#: 12735
In Stock
SteamTunnel
- 9' 2" tunnel length
- 3-1/4" tabletop chain conveyor
- All stainless steel construction
- 6" ducting with a VFD controlled blower motor
- Opening dimensions: 9" tall x 7" wide ( possibly lower conveyor in tunnel another 3-1/2" if needed)
- OAD: 13' 6" long x 43" deep x 68" tall
- 240V single phase
Stock#: 13048
In Stock
TPA Heat Tunnel
- Heat shrink tunnel with a 19" wide fiberglass mesh belt
- Variable speed conveyor
- Athena temperature control
- Mounted on casters for easy movement.
- Tunnel opening is 22" wide x 11" tall.
- Length of tunnel is 52-1/2" long.
- Complete unit measures 72" L x 36" W x 65-1/2 " tall.
- Belt height set @ 36".
- 208/240 / 3 / 60hz. @ 40 amps
Stock#: 12365
In Stock
Warming Tunnel
- Heat Exchanger item 13157
-Height: 65in
-Width: 138in
-Length: 22ft
-Max Clearance Height for Tunnel: 1ft
-Main Gear Box Ratio: 224:1
-Matt Top
Top Baldor(Blower)
-Diameter: 7in
-7.5hp (pump)
Baldor Motor/Blower
-7.5hp (pump)
-Diameter: 7in
Leeson Motor/Blower
-7.5hp (pump)
Emerson (Gear Box)
-1.5hp
-Ratio: 224:1
Stock#: 13241
In Stock
Page: 1 of 2