Berks Plant Design & Maintenance, Inc. Your Machinery and Automation Partner Since 1981

610-916-0666

View Machinery by Category
-OR-

Machinery and Equipment - View by Category

Items Displayed are limited to machinery and equipment currently located at our facility. BPDM has many other items listed that are either surplus in the field or scheduled for removal.

To best serve our customers these categories are very specific. If you do not see the machinery you are looking for below please refine your search or do not hesitate to contact us.


Page: 1 of 2
Axon 400SL

-Sleeve Labeler/Neck Bander
-Heat Shrinkable
-400 containers per minute (single head)
-800 containers per minute (dual-head)
-Volts: 230
-PH:3
-Hz: 60
-A: 50
-Emergency Stop Feature
-Main Disconnect Switch
-Height: 90in
-Width: 71-1/2in
-Height: 46-1/2in
-Allen-Bradley Panel View Plus 600 (On 90° rotating arm)
-Processes both full body sleeves and tamper evident bands
-Thin Gauge Film Capabilities
-Container Size: 1-1/4in to 4-3/4in Diameter

Ice Qube Inc:
-Industrial Cooling Equipment
-Model: IQ1200VXS
-S/N: 2A1201 10-4
-Volts: 230
-Refrigerant: 134A
-AMPS: 1.8
-8.0 Ounces
-Phase: 1
-Hz: 60
Design Pressure:
-Low-Side: 134ps
-High-Side: 296ps

Control Box
-Model #: Lesiter/Dist Box
-Serial #: E-100916
-Volts 230
-PH:3
-Hz60
A: 85
Stock#: 13276
In Stock
Axon Neck Bander

- EZ200

- EZ-Series Standard Format:

- Speed (Single Head) 120 cpm*
- Speed (Dual Head) 220 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12733
In Stock
Axon Neck Bander

- EZ-200
- EZ-Series Standard Format:
- Speed (Single Head) 120 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12800
In Stock
Axon Neck Bander EZ-A1

- Stainless steel fully automatic tamper evident neck bander
- Runs unregistered bands at speeds up to 40 cpm dependent on length of band.
- 45" vertical hang over clearance.
- 110 volts
Stock#: 12193
In Stock
CMS Gilbreth Neck bander

- Twin feed screw control
- 6" layflat capacity
- 20" Roll capacity
- 440V 3 phase
- Foot print - 6' long X 3 foot deep
- Separate main control cabinet on stand - 3 ft x 3 ft
Stock#: 12897
In Stock
Krones Sleevematic Sleeve Labeler / Neck Bander

-500max bottles per minute
-Standard Batch
-Right to Left Direction
-Cutting Unit S
-Film Expanding Mandrel
-Film Cutting Unit w/ Several Servo-Controlled Cutters
-Sleeve Length Infinitely Adjustable
-Electronic Cutting Mark Control
-Deaeration Perforation
-Integral Machine Guarding in Hinged Door Design
-415v
-50Hz

-13273 Steam Tunnel Shrinkmat 4000 (Separate)
Stock#: 13272
In Stock
PDC Sleeve Labeler / Neck Bander

- Fully enclosed and interlocked for safety
- Twin feed screws at infeed
- 3-1/4" tabletop chain conveyor
- Container inspection with eject system on outfeed conveyor
- 22" label stock reels (2) with splicing table
- OAD: 10' L x 5' Deep x 76" Tall (Add 14" for status light)
- 480V 3phase
Stock#: 13047
In Stock
PDC Sleeve Labeler System

- Consists of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12806
In Stock
PDC Sleeve Labeler System

- Consists of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12804
In Stock
PDC Sleeve Labeler System

- Consists of sleeve labeler, dry heat tunnel (KAL300) and a label unwinder (UW-20)
LABELER
- DOM: 2002
- Rate: 350 Bottles per minute
- Bar Code Reader - Acusort Adaptascan
- Inspection / ejection verification system
- Infeed / outfeed fallen bottle sensors
- AB PLC controls w/ HMI Panelview 550
- 480V/3Phase/35 AMP
LABEL UNWINDER
- DOM: 2002
- DIMS: 32"L x 55"W x 86"H
DRY HEAT TUNNEL
- DOM: 2002
- 480V/3Phase/100 AMP
- DIMS: 44"W x 12'L x 63"H
Stock#: 12805
In Stock
Axon EZ-100

- One Skid Mounted Axon EZ-100 Sleeve Labeler/Neck Bander
- Two 48" shrink tunnels (dual zone Shrink)
- Film registration
- Horizontal perforation assembly
- Cooled Integral table top conveyor
- All Stainless Steel construction
- Unit has already been reconditioned setup tested and is in excellent running condition still threaded.
- 480 volts
Stock#: 12429
Sold - Contact us for similar option
Axon EZ-200

- EZ-Series Standard Format:
- Speed (Single Head) 120 cpm*
- Film Layflat Range: 56mm to 200mm
- Container Diameter: 33mm to 124mm
- Applied Materials: PVC, PETG, OPS, PLA
- Film Thickness: 40-70 microns(1.5 to 3.0 mil)
- Power: 220/110 V
- Air Pressure: 80 psi
- Air Volume: 3-5 scfm


*Speeds dependent on container size
Stock#: 12801
Sold - Contact us for similar option
Page: 1 of 2
Berks Plant Design & Maintenance 150 Birch Hill Road Shoemakersville, PA 19555 Phone: 610-916-0666 Fax: 610-926-1584 Email:
Berks Plant Design & Maintenance's headquarters is located in Berks County in Shoemakersville, PA. We provide packaging equipment, process machinery, bottling equipment, parts, and services to clients anywhere in the United States, Canada, Mexico, and other points abroad. Our clients know our reputation for our expertise and excellence in customer service. Our equipment experts will help you identify your needs, and work with your budget to get you the best possible equipment solutions for your next project.